Initial condition setting:in the energized ,all cards information of the door lock is empty.
Two function cards of the door lock:Setting Card and Deleting Card.After the lock installed is initial state.
The specific methods of the function card effect:first,put the setting card in the area of read card,blue light,buzzer sends out a loud sirens,remove the card immediately,the blue light off;then,put the removing card in the area of read card,blue light,buzzer sends out a loud sirens,remove the card immediately,the blue light off,remove the card immediately.
Special Attention:must make the setting card to take effect firstly,then delete card,order can’t instead.
First,Set of the Key Card:
There are three key card according to the privileges and function:
1,normal key card--can unlock,can’t open locked.
2,locked key card--can unlock,also can open locked.
3,normally open key card--after a single use,the door lock from open become closed,use again,the door lock from closed become open,such cycle,no matter whether its locked!
Specific configuration method is as follows:
1,set of the normal key card:put the setting card in the area of read card,lock sends out a loud sirens,during the tweet,remove the setting card immediately,blue light,then put the key card in the area of read card,blue light,lock sends out a loud sirens,the blue light off,set card finished.
Repeat the above the set-up process,set the new key card,each lock can be equipped with a maximum of 256 key card.
2,set of the locked key lock:unscrew the locked tongue,put the setting card in the area of read card,lock sends out a loud sirens,during the tweet,remove the setting card immediately,blue light,then put the key card in the area of read card,blue light,lock sends out a loud sirens,the blue light off,set card finished.
Repeat the above the set-up process,set the new key card,each lock can be equipped with a maximum of 256 key card.
3,set of the normally open key card:put the setting card in the area of read card,lock sends out a loud sirens,during the tweet,remove the setting card immediately,blue light,hold the latch or press the back handle does not move,put the key card in the area of read card,blue light,lock sends out a loud sirens,the blue light off,set card finished.
Repeat the above the set-up process,set the new key card,each lock can be equipped with a maximum of 1024 key card.
Second,Door Opening Operation of the Key Card:
Key card only through set of the setting card will be effective after.The method of the door opening operation:put the key card in the area of read card,blue light,lock sends out a loud sirens,press handle can open.
Third,Use of the Deleting Card:
After use of the deleting card,all key lock can be open will failure.
Method of Use:put the key card in the area of read card,blue light,lock sends out a loud sirens,operation completed.Lock the door key card in the total failures.If you want set the door card,please refer B--set of the key card.
Special Attention:
1,Due to the special purposes of setting card and deleting card,please safe keep after use,in order to avoid unnecessary trouble and security risks.
2,The setting card error or missing,must hardware initialization to clear all the data should be reset.
The Clear Method:in the case of UPS,find INI location of the pin,short circuit of two pins,blue light,lock sends out a loud sirens,initialization completed.The special location of the pin in the lower right corner of the circuit board.
